Milwaukee M18 FUEL High Speed Chain Snake for 1 1/2-4 Pipes
Original price was: 3,379.00$.2,999.00$Current price is: 2,999.00$.
The MILWAUKEE® M18 FUEL™ High Speed Chain Snake for 1-1/2” – 4” Pipes delivers the power to descale, with instant setup. The M18 FUEL™ Chain Snake provides the power to descale up to 75’ out delivering full power at max distance. The Chain Snake delivers the easiest, most controlled wall-to-wall clean, featuring an infinite variable speed, an electronic foot pedal, and a mechanical clutch. Eliminate the hassle of extension cords, finding electrical outlets, and unreliable drill connections, the Chain Snake provides access to power anywhere. The included (2) M18™ REDLITHIUM™ High Output™ HD 12.0 Battery Packs allow the tool to clear 150’ of scale build-up per charge. The M18 FUEL™ High Speed Chain Snake comes with 1-1/2”, 2”, 3”, and 4” standard chain knockers to clear grease and soft blockages. Additional accessories available: 1-1/2” Carbide (48-53-3024), 2” Carbide (48-53-3025), 3” Carbide (48-53-3026), 4” Carbide (48-53-3027), Grease Penetrating Head (48-53-3028).
The MILWAUKEE® M18 FUEL™ High Speed Chain Snake for 1-1/2” – 4” Pipes delivers the power to descale, with instant setup. The M18 FUEL™ Chain Snake provides the power to descale up to 75’ out delivering full power at max distance. The Chain Snake delivers the easiest, most controlled wall-to-wall clean, featuring an infinite variable speed, an electronic foot pedal, and a mechanical clutch. Eliminate the hassle of extension cords, finding electrical outlets, and unreliable drill connections, the Chain Snake provides access to power anywhere. The included (2) M18™ REDLITHIUM™ High Output™ HD 12.0 Battery Packs allow the tool to clear 150’ of scale build-up per charge. The M18 FUEL™ High Speed Chain Snake comes with 1-1/2”, 2”, 3”, and 4” standard chain knockers to clear grease and soft blockages. Additional accessories available: 1-1/2” Carbide (48-53-3024), 2” Carbide (48-53-3025), 3” Carbide (48-53-3026), 4” Carbide (48-53-3027), Grease Penetrating Head (48-53-3028).
Related products
Milwaukee M12 Auto Technician Borescope (Bare Tool)
Optimized for the automotive technician, the MILWAUKEE® M12™ Auto Technician Borescope delivers 5mm access and clear diagnosis, meeting inspection demands in passenger, light truck, and diesel applications. Powered by the M12™ battery system, this borescope is fully compatible with all M12™ solutions in your toolbox. The 5mm camera head, paired with a 3’ cable optimized for rigidity, allows for best access in tight spaces, including glow plug holes and fuel injector ports. Front and side view cameras with adjustable LED brightness provide increased application viewing. High-definition photo and video capture with 4x zoom allows the technician to diagnose hairline cracks with confidence. The 4.3” rotatable screen allows the technician to adapt the borescope to their inspection environment. Conveniently access, export, and share files stored on the included 32GB SD card. Equipped with HEAT SENSE™ Temperature Alert technology, if the vehicle being inspected is too hot to use the camera without potential damage, the borescope notifies the user and shuts down, helping the technician extend the life of their cable. Field-replaceable camera cable (48-59-3150) for reduced downtime.
Milwaukee M12 FUEL INSIDER Extended Reach Box Ratchet Kit
The MILWAUKEE® M12 FUEL™ INSIDER™ Extended Reach Box Ratchet is a new-to-world solution that reinvents the traditional ratchet. The low-profile head design allows sockets & adapters to be inserted directly into the tool. The M12 FUEL™ INSIDER™ delivers UNRIVALED ACCESS and over ¾” shorter head profile size with the socket to reach deep into the engine bay and fit into the tightest spaces. The INSIDER™ delivers the combination of 60 FT-LBS OF MAX TORQUE and 350 RPMs to remove stubborn fasteners and complete more work faster. Mechanics will experience the ULTIMATE VERSATILITY with our provided INSIDER™ Box Ratchet Sockets (8-19, & 21mm), ¼” Hex Bit, ¼” anvil adapter, & 3/8” anvil adapter to tackle any job in the shop. The Box Ratchet 6 Point Sockets are pass through up to 15mm & 9/16” to run nuts on threaded rod and eliminate the frustration of sockets bottoming out. The included M12 REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery is built with a resistant housing, providing increased protection against exposure to common oils, greases, and solvents found in automotive and manufacturing environments. The M12 FUEL™ INSIDER™ Extended Reach Box Ratchet and the M12 REDLITHIUM™ HIGH OUTPUT™ CP2.5 Battery are part of the M12™ System, which is fully compatible with over 150 solutions.
Milwaukee M18 FORCE LOGIC Press Tool with ONE-KEY (Bare Tool)
The MILWAUKEE® M18™ FORCE LOGIC™ Press Tool with ONE-KEY™ is the industry’s first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all Milwaukee press tools, the in-line design with a forward hand position unlocks the ability to press with one hand and will fit nearly anywhere an arm can fit. Equipped with REDLINK™ electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can’t complete. This press tool is ONE-KEY™ enabled, logging, and uploading data from every press for retrieval via the ONE-KEY™ desktop or mobile app. This allows for performance monitoring and provides peace of mind in quality connections. With 1/2” to 4” capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors.
Milwaukee M18 FUEL 1inch High Torque Impact Wrench with ONE-KEY Kit
The MILWAUKEE® M18 FUEL™ 1" High Torque Impact Wrench w/ ONE-KEY™ is the first cordless 1” High Torque Impact Wrench. The POWERSTATE™ Brushless Motor delivers up to 1,800 ft-lbs of Nut-Busting Torque and 1,500 ft-lbs of fastening torque, making this the most powerful cordless impact torque wrench, able to complete the most demanding applications. At only 13 lbs with battery, the tool is up to 7 lbs. lighter than corded units, providing less fatigue for easier overhead job site applications. The battery-powered impact wrench has cordless convenience and eliminates the need for compressors, generators, cords, and hoses, reducing the cost of ownership. A lack of reliance on cord and hoses allow for greater portability and the ability to complete applications unable to be performed with a corded or pneumatic unit. The REDLINK PLUS™ Intelligence achieves maximum performance and protects the high torque impact gun against overloads, over-heating, and over-discharge. M18™ REDLITHIUM™ Battery Packs are compatible with all M18™ tools, delivering more work per charge and more work over the life of the pack. The 4-Mode DRIVE CONTROL™ provides greater control over the output speed and power of the high power impact wrench. The ONE-KEY™ capabilities allows for Customization, Tracking, and Management of the impact wrench. ONE-KEY™ technology also provides the ability to set a repeatable torque output for maximum control.This kit also includes two M18™ HIGH OUTPUT™ XC8.0 batteries, an M18™ & M12™ Rapid Charger, and a contractor bag.
Milwaukee M18 FUEL 7 Tool Combo Kit
The Milwaukee M18 FUEL™ 7-Tool Combo Kit delivers the most advanced 18-volt cordless drilling, fastening, and cutting technology in the industry. This power tool kit features seven M18 FUEL™ 18-Volt lithium-ion brushless cordless tools, including a 1/2 in. hammer drill, 1/4 in. impact driver, 1/2 in. mid-torque impact wrench, SAWZALL® reciprocating saw, 6-1/2 in. circular saw, 4-1/2 in. / 5 in. grinder and LED work light. M18 FUEL™ is fully compatible with the MILWAUKEE® M18™ Cordless system, featuring over 250 plus tools. M18 FUEL™ features the most advanced cordless technology in the industry with a POWERSTATE Brushless Motor, REDLINK™ PLUS Intelligence, and REDLITHIUM™ Battery Technology, for longer motor life, longer run time, and more power.
Milwaukee M18 FUEL 9inch Cut-Off Saw with ONE-KEY (Bare Tool)
The Milwaukee® M18™ FUEL™ 9 in. cut-off saw w/ ONE-KEY™ is an extremely versatile solution for cutting a large variety of materials. The M18 fuel 9 in. cut-off saw runs on Milwaukee's M18 REDLITHIUM batteries instead of using gas like most traditional cut-off saws . This saw delivers the power to cut reinforced concrete as well as a large variety of other metal and masonry materials. It delivers this performance while still being up to 50% lighter than gas saws that dominate the market today. By utilizing Milwaukee's M18 REDLITHIUM high output HD12.0 battery, this saw delivers no gas headaches. It produces no fumes so it can be used indoors, it starts up instantly, it eliminates the need to mix gas and oil, and there is no gas engine maintenance. The battery will also work on any of Milwaukee's other 200+ M18 solutions. The M18™ FUEL™ 9 in. cut-off saw also has ONE-KEY™ integrated so users can wirelessly connect the tool with their smart phone to track and manage the tool. (Batteries and charger sold separately).
Milwaukee M18 Short Throw Press Tool Kit with PEX Crimp Jaws
The M18™ short throw press tool is the fastest press tool on the market, pressing 40% faster than the competition providing users the fastest, effortless installs from branch to fixture. Designed for one handed use, the M18™ short throw press tool is an easy to use solution compared to hand tools. Spring loaded jaws grip the ring for precise alignment to the fitting, while auto cycle ensures a full press every time; delivering added assurance of quality connections. Providing force optimized for residential installs and eliminating the downtime caused by calibration intervals, the M18™ short throw press tool reduces cost of owner ship and maximizes productivity for the residential installer. Powered by the M18™ Red Lithium battery means this is a part of the only press system where you can cut, fasten and connect on one system.
Milwaukee MX FUEL 14 in Cut-Off Saw with RAPIDSTOP Brake Kit
The MILWAUKEE® MX FUEL™ 14" Cut-Off Saw w/ RAPIDSTOP™ Brake delivers 14” gas performance with no gas headaches. The POWERSTATE™ Brushless Motor delivers the power to cut tough materials like concrete, rebar, and ductile iron. It delivers instant power with a push-button start and eliminates the repetitive motions of a pull start, providing faster cutting from start to finish. No gas engine means fewer wearable parts, less noise and vibration, and zero emissions for a safer workplace indoors or outdoors. RAPIDSTOP™ Blade Break & Kickback Control provides enhanced safety by stopping the blade in three seconds during regular use and in cases of kickback. With two (2) MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Batteries, it can cut 28 ft fully plunged in concrete or 240 cuts in #5 rebar. In just 45 minutes, you can charge an MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 to 100%. Both the MX FUEL™ REDLITHIUM™ FORGE™ XC8.0 Battery & MX FUEL™ Super Charger are COOL-CYCLE™ Capable. COOL-CYCLE™ Active Cooling System provides high-speed cooling for less downtime. The REDLINK PLUS™ Intelligence ensures optimal tool performance and provides overload protection during tough applications. The Saw is ONE-KEY™ Compatible: Track, manage, and secure equipment from your mobile device or computer. The saw includes a load light indicator that optimizes runtime and blade life, as well as an electric onboard water connection that releases water only when the trigger is released, reducing mess onsite.
Reviews
There are no reviews yet.