Milwaukee M18 2 Speed 1/4 Hex Impact Driver – (Bare Tool)
Milwaukee's M18™ Two-Speed 1/4-Inch Hex Impact Driver is a lightweight yet powerful addition to your tool collection for those jobs when you need to screw something down tight. Powered by the M18 REDLITHIUM™ battery system, this impact driver accepts the same battery as the other M18 tools in your collection. The four-pole frameless motor performs up 3,450 impacts per minute to deliver 1,500 in-lbs. of torque. Swapping out bits on this impact driver is fast and easy with the 1/4-inch quick change chuck, and an LED on the cordless impact driver illuminates the area so that you can work in difficult and dark spaces. The REDLINK electronic intelligence system provides protection from overloads to keep you and your tool safe, while the two-mode DRIVE CONTROL system gives the impact driver outstanding versatility for any project.
Milwaukee M18 2-Speed 1/4 In. Right Angle Impact Driver (Bare Tool)
The M18™ Two-Speed 1/4-Inch Right Angle Impact Driver - Bare Tool offers the outstanding performance you expect from Milwaukee in a compact form that's only 1.7 inches long to reach where other drivers can't. This cordless right angle impact driver is part of the versatile and long-running M18 REDLITHIUM™ system, which delivers high-performance battery power. You can switch between two power modes to get up to 2,250 rpm that translates into heavy driving power. REDLINK Plus™ technology keeps this Milwaukee right angle impact driver operating at its highest performance level while it protects the tool from overloads. An integrated LED work light illuminates your work area for precision while you operate in tight spaces. This cordless right angle impact driver has an extended paddle switch so that you can hold it from the back of the handle for greater access to tricky spots.
Milwaukee M18 3/8 In. Impact Wrench (Bare Tool)
The Milwaukee® M18™ 3/8-Inch Impact Wrench (Bare Tool) generates up to 167 foot-pounds of torque for fast removal or securing of nuts, bolts and other fasteners. This impact wrench is part of the versatile M18 line and runs on the same M18 REDLITHIUM™ batteries you already use with your other Milwaukee tools, and it has a four-pole brushless motor for effortless performance. This cordless impact wrench measures just 6 inches to fit even in cramped spaces under the hood of a car. A 3/8-inch anvil with a friction ring makes changing out sockets fast and easy, so you can get back to work instead of fumbling with sockets, and the integrated LED work light illuminates your space to give you more accurate results while you work with this M18 impact wrench. A belt clip keeps the impact wrench close at hand while you work with other tools.
Milwaukee M18 Brushless 1/2 in High Torque Impact Wrench with Friction Ring (Bare Tool)
The MILWAUKEE® M18™ Brushless 1/2” High Torque Impact Wrench delivers faster driving speeds and increased productivity without the hassle of a cord. The brushless motor delivers 1750 RPMs & 2000 IPMs, optimized for driving lag bolts and concrete anchors on the jobsite. Paired with REDLINK™ technology and REDLITHIUM™ batteries, the Brushless High Torque will be able to drive (35) 6” x 1/2” lag bolts into pressure-treated lumber. A 1/2” anvil with friction ring will allow users quick and easy socket changes and onboard LED light for greater visibility.
Milwaukee M18 Compact 1/4 in Hex 3-Speed Impact Driver (Bare Tool)
The MILWAUKEE® M18™ Compact Brushless 1/4" Hex 3-Speed Impact Driver is more compact and more capable. Measuring only 4.4" in length and 2.1" in width, the compact size allows for better access in tight spaces while being lightweight and portable. The 3-Mode Drive Control™ provides greater control over output speed and power. The brushless motor technology provides 1,700 in-lbs. of torque and up to 3600 RPMs for faster speed and increased productivity. MILWAUKEE® REDLINK™ Intelligence optimizes the way the M18™ REDLITHIUM™ batteries work with the impact driver for best-in-class performance. Premium components and an all metal gearcase provide durability that professionals require. The Compact Brushless 1/4" Hex 3-Speed Impact Driver is part of the M18™ system, fully compatible with over 250+ solutions.
Milwaukee M18 Cordless Lithium-Ion 4-Tool Combo Kit
The M18™ Cordless Lithium-Ion Four-Tool Combo Kit includes a Milwaukee impact driver, a hammer drill/driver, a Sawzall reciprocating saw and a work light. This kit also includes a multivoltage charger and two long-running M18 REDLITHIUM batteries that power all the M18 tools in your collection. The Milwaukee hammer drill boasts up to 500 in-lbs. of torque to drive or drill into the toughest materials, and a quick-connect chuck on the 1/4-inch impact driver gets you back to work faster. Hands-free operation lets you use the Milwaukee work light with ease for added safety and precision on your project, while the 3,200 strokes-per-minute performance from the Sawzall reciprocating saw lets you tear into wood, metal and fiberglass for detail or demolition work.
Milwaukee M18 Drum Machine for 3/8-1/2 Cable
The MILWAUKEE® M18™ Drum Machine with a 3/8" cable allows you to clean drains confidently with instant setup. This M18™ Drum Machine provides more power than corded machines to tackle tough blockages like grease, scale, and build-up. It can clear drains out to 100' with a 3/8" cable or 75' with 1/2" cable. The included 3/8" cable is best for use in 1-1/2"- 3" drain lines. For larger drain lines up to 4”, the machine is compatible with 1/2” cables. Complete multiple jobs on one battery charge while simultaneously eliminating the hassle of extension cords and finding electrical outlets, providing access to power anywhere. The enclosed drum and lightweight design allow for cleaner, easier transportation on and off the job. The Milwaukee M18™ Drum Machine is compatible with MILWAUKEE® CABLE DRIVE™ Assembly (47-53-2816) which gives you the capability to automatically feed and retract cable up to 15-20 feet per minute. Additional cable sizes and drum are available in 3/8" x 100' (48-53-2777) and 1/2" x 75' (48-53-2778), drum only (47-53-2817).
Milwaukee M18 FORCE LOGIC 2 in.-3 in. ProPEX Expansion Tool Kit
The M18™ FORCE LOGIC™ 2 in. to 3 in. ProPEX® expansion tool combines with the M12™ and M18™ ProPEX® expansion tools to deliver the industry’s most consistent commercial installations. Its powerful hydraulic system expands up to 3 in. Uponor® PEX pipe, and like its M12™ and M18™ predecessors, features an auto-rotating head that expands pipe uniformly and maximizes installation speed. A single trigger pull initiates the tool to rotate, expand, and reset automatically, ensuring consistency across the entire installation. Its intelligent design provides the user optimum balance in overhead connections and can also be flipped over to sit squarely on a table-top for extended use on site or in the shop. Featuring MILWAUKEE® ONE-KEY™ Technology, track your tool within 100 ft. range of any phone with the ONE-KEY™ app, view tool usage, receive notifications for recommended maintenance and sync information wirelessly to the cloud.
Milwaukee M18 FORCE LOGIC Long Throw Press Tool Kit
The M18™ Force Logic™ long throw press tool is the smallest, most intelligent extended length press tool on the market. An adjustable stroke length delivers optimized cycle time on 1-1/2 in. – 2 in. Grinnell® stainless steel press connections. The press tool’s in-line design offers unrivaled access for navigating around installed pipes, while also delivering on the highest level of press accuracy and reliability. Utilizing REDLINK™ Intelligence, the M18™ Force Logic™ long throw press tool features auto cycle and a pre-press battery check to prevent partial presses, and provide the user peace of mind. With a green LED indicator, the tool visually indicates both a completed press cycle and when calibration is needed. Delivering the longest calibration interval in the industry, the tool will operate 50,000 cycles before calibration is needed, keeping the tool on the job to maximize return on investment. Powered by the M18™ REDLITHIUM™ battery pack, this is the only press system where you can cut, fasten and connect on one system.
Milwaukee M18 FORCE LOGIC Press Tool Kit with One-Key with 1/4inch-7/8inch Streamline ACR Jaws
The MILWAUKEE® M18™ FORCE LOGIC™ Press Tool Kit w/ ONE-KEY™ with 1/4"-7/8" Streamline™ ACR Jaws changes the game in refrigerant line installations, offering a flame-free, efficient alternative to traditional brazing. The ACR press jaws, compatible with Mueller Streamline™ ACR Press fittings, unlock productivity for HVAC system installers, eliminating nitrogen purges, combustible gases, and expensive silver solder necessary for brazing. As the industry’s first press tool with remote tracking, management, and lockout, ONE-KEY™ allows for logging and uploading data from every press via the desktop or mobile app, making it the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while significantly smaller and nearly 20% lighter than the leading competitor. The in-line design with a forward hand position unlocks the ability to press with one hand and will fit nearly anywhere professionals can fit their arms. Milwaukee REDLINK™ electronics provide the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time, and the pre-press battery check prevents the tool from starting a press it can’t complete. With 1/2” to 4” capacity (depending on material) and compatibility with over 20 unique fitting systems, the press tool is an optimal solution for HVAC and mechanical contractors.
Milwaukee M18 FORCE LOGIC Press Tool with ONE-KEY (Bare Tool)
The MILWAUKEE® M18™ FORCE LOGIC™ Press Tool with ONE-KEY™ is the industry’s first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all Milwaukee press tools, the in-line design with a forward hand position unlocks the ability to press with one hand and will fit nearly anywhere an arm can fit. Equipped with REDLINK™ electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can’t complete. This press tool is ONE-KEY™ enabled, logging, and uploading data from every press for retrieval via the ONE-KEY™ desktop or mobile app. This allows for performance monitoring and provides peace of mind in quality connections. With 1/2” to 4” capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors.
Milwaukee M18 FORCE LOGIC Press Tool with ONE-KEY with 1/2inch-2inch CTS Jaws
The MILWAUKEE® M18™ FORCE LOGIC™ Press Tool with ONE-KEY™ with 1/2"-2" CTS Jaws is the industry’s first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all Milwaukee press tools, the in-line design with a forward hand position unlocks the ability to press with one hand and will fit nearly anywhere an arm can fit. Equipped with REDLINK™ electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can’t complete. This press tool is ONE-KEY™ enabled, logging, and uploading data from every press for retrieval via the ONE-KEY™ desktop or mobile app. This allows for performance monitoring and provides peace of mind in quality connections. With 1/2” to 4” capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. This kit includes two M18™ REDLITHIUM™ CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.